If your ZLEDS light assembly doesn’t use a direct plug-and-play connection, follow these steps carefully:
-
Disconnect your vehicle’s battery before doing any wiring to avoid short circuits or damage.
-
Connect any OEM plugs, bulb adapters, or splice connections as required by your setup.
⚙️ Primary Wire Color Guide:
-
BLACK – Ground (0V)
-
GREEN – 12V Parking Light
-
RED – 12V Brake Light
-
YELLOW – 12V Turn Signal
-
WHITE – 12V Reverse Light
-
PURPLE – 12V Controlled/Fused Power Source (max 5A)
-
Connect the crossover cable between both assemblies. Make sure each wire color matches exactly on both ends.
🔥 Warning: Connecting the crossover cable backward will permanently damage the control module and void the product warranty.
Double-check all connections before powering the system to ensure safety and long-term reliability.